New Combi Hinge and Lock Jig
New 2 in 1 Jig that will cut Door Hinges and Locks in one.
- Uses a 12.7mm cutter and 16mm guide bush
- Single piece jig ensures level operating, quick set up and no pieces will get lost.
- Incorporates bradawl pin fixings for extra stability
- Each Jig comes with a tough jig carry case
- Self Centring with the use of elongated securing clamps
- Deep mortises can be achieved with a suitable size of auger bit.
- Produces quick, clean and accurate results on door (including hardwood) 34mm to 58mm thick.
- The hinge recess is adjustable with a minimum distance of 5mm and a maximum of 60mm.
- The jig will recess hinges to a minimum distance of 176mm (to the centre of the hinge) from the top and bottom edge of the door. This is in accordance with BS EN 1935.
Cuts Hinges: Cuts 102mm and 76mm Hinge sizes in doors and door frames.
Cuts Locks: Cuts mortise and face plate recesses for popular door locks.
Uses a set of interchangeable laminate templates which can be used to cut the following sizes:
Face Plate: See brochure
Lock Body: See brochure