Contact Us

An error occurred. Message not sent.
Cabinet Hinge Jig
cabinet-hinge-jig

Cabinet Hinge Jig

This jig is used to recess a 35mm hole cut out for cabinet hinges in kitchen doors and carcasses. Usually these holes are not ready cut on doors and carcasses where there is a built in dishwasher or fridge unit. Peg holes are set with a 3” setting from top or bottom of the door but the jig can be used to set any height using the centre lines. There are pegs to set the correct distance in from the edge of the door. The jig is small and easier to use than a 35mm hole cut out on a standard worktop jig.

Contents:

  • Jig plate
  • 4 x Aligning pegs
  • Full user instructions

Download Cabinet Hinge Jig Feature Sheet

download-pdf

Download Cabinet Hinge Jig Instructions

download-pdf