Contact Us

An error occurred. Message not sent.
ColorFill - Directions for use
01 - colorfill-sealing-step1-big

Sealing Worktop Joints:

Step 1:
Apply ColorFill to the top and bottom of one side of the worktop joint.

01 - colorfill-sealing-step2-big

Step 2:
Bring surfaces together and quickly level. Allow excess ColorFill to squeeze out of the joint, clean off excess with spatula and use finger on front edge. Finish off using a solvent moistened tissue cleaning at 90° to the joint. A final coat can be applied later if necessary, finish off with a solvent moistened tissue as before.

01 - colorfill-sealing-step3-big

Step 3:
The result is a clean, hygienic and waterproof joint which is almost invisible.

ColorFill - Repairs to damaged laminates
01 - colorfill-repairing-big

Step 1:
Clean the damaged area with a solvent moistened tissue to ensure there are no oil or grease residues on the surface.

Clean across the area with a spatula to remove any small chips or fragments.

Step 2:
Select the correct colour and squeeze out a liberal amount onto the edge of the ColorFill spatula. Position the spatula behind the area to be repaired and press firmly down on the surface pulling the spatula towards you filling the area with ColorFill. Scrape off the overfill from around the damage and draw the spatula across the damage.

Step 3:
Use a solvent moistened tissue to clean off the overfill around the repair taking care not to clean out the filled area.

Step 4:
For final clean up allow 24 hours to fully harden and clean the area with household washing up liquid and warm water

ColorFill - Video